If you are following on Facebook you probably saw a picture I posted up on Friday morning showing off a new toy I picked up.

If you like the blog on Facebook you have see this.

If you like the blog on Facebook you have see this.

I have been looking for a revolver for awhile now. At first I was looking for a Smith Bodyguard or a Ruger LCP. I thought about it and realized that all the guns I really put to work are 9mm. My Dillon is set up for 9mm and is usually cranking out rounds at least one night a week to keep myself ahead of what I use during practice and classes. It became clear that I really didn’t need to add another caliber to the mix and I wanted to keep commonality across the board with my guns. Another reason I wanted a revolver was to mold myself into a more rounded shooter. I want to be able to make sure that when we get a student shooting a revolver I can help them the same as I can for a semi-auto shooter.

2013-10-20_17-56-10_899

Taurus 905 9mm

I ended up settling on a Taurus 905 in 9mm. The 905 is a 5 round, double single action with a 2 inch barrel. My first impression when opening the box was good. The fit and finish is what you would expect from a new gun. When I was still out searching I ran across a certain brand that actually looked like the barrel was JB Welded onto the frame. Unloaded the gun is pretty hefty. The grips fit me pretty well and the trigger is what I expected from a band new revolver. The 9mm being a rimless cartridge needs a little help staying inside the chamber. The 905 utilizes moon clips and comes from the fctory with a total of 5.

I finally got a chance to shoot it out on our farm. I put about 30 rounds through it before it got too dark. I was using some of my reloads and was pleasantly surprised at the low recoil. The loads are 115gr RN from Xtreme Bullets being pushed by 4.0gr of Titegroup. I am thinking that if these rounds are too snappy for the wife I can even hold a little back on the powder and make it even more manageable but I am doubting it will be a problem. The accuracy is pretty much what I expected for a 2 inch revolver and me behind the trigger. Like I said above I am not a great revolver shooter but I managed a decent group at 7 yards.

The one small problem I did run across was the moon clip was having a hard time hanging onto the 2011 S&B casing. It held Blazer, Federal, and 2012 S&B casing just fine. I guess there is a slight difference in the 2011 specs. I didn’t run across any other problems and was pretty happy with the way it shot.

A closer look at the moon clip

A closer look at the moon clip

I am still up in the air if I am going to carry this gun at all just yet. I can see myself carrying it as a backup gun but not a primary. I don’t want to give up the capacity the Glock offers just yet. I hope to keep practicing and getting better in the way of the revolver, and I will be sure to keep you updated if I run across any problems. As of right now I think this is going to be a great learning piece and I can’t wait to get out and spend a little more time behind it. I intend to get it all cleaned back up and squirt some Slipstream into it and see what difference that will make with the trigger.

Any questions, comments, or tips regarding the Taurus feel free to email me or hit me up on the Facebook Page.

Subscribe and Share often,

BS

Advertisements
Comments
  1. gunnerjacky says:

    Taurus 950 is a nice gun which have feature of nice shooting with good basic coverage hits and no misfires. Also you will get slow forced double action after firing.
    ____________________
    MA Firearms Safety Course

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s